Loop Powered Pressure Transmitter

Loop Powered Pressure Transmitter

Details
The loop powered pressure transmitter draws its operating power from the same 4-20mA line that carries the measurement, so only two conductors reach the device.
Category
Industrial Pressure Transmitter
 
Send Inquiry
Description
Technical Parameters

Signal Pair Doubles as the Supply

 

loop powered pressure transmitter

The loop powered pressure transmitter draws its operating power from the same 4-20mA line that carries the measurement, so only two conductors reach the device. Most PLC and DCS analog input channels accept it without modification, and no separate 24V feed has to be pulled to the point. The stainless steel body copes with the corrosion found in ordinary industrial fluids and keeps the unit light. No local display is fitted, which keeps the outline compact and the integration tight. A wide supply window rides out the 24V DC sags and surges common on plant floors.

 

Technical Data Table

 

Parameter

Specification

Supply

Loop powered (10~30V DC)

Output signal

4-20mA

Pressure type

Gauge, absolute (by model)

Overload capacity

Typically 1.5–2 times full scale

Body material

Stainless steel

 

Skid, HVAC and Cylinder Circuits


Water-treatment skids let the PLC cabinet power and read these points together. Chilled-water and cooling-water pipe networks in HVAC systems use them for pressure monitoring. Automated production lines place them on cylinder air lines and low-pressure hydraulic circuits for remote pressure transmission. Gauge and absolute pressure types are available by model.

 

Overload Margin and Wiring Care


Overload capacity is typically 1.5 to 2 times full scale, which absorbs the momentary pressure surges common in piping; running well above range for long periods should be avoided. Some reverse-polarity protection is built in, but the supply polarity and PLC channel should still be checked before power-up.

 

Follow-Up Service and Commercial Terms


JIangsu Zhaollong electri CS Co.ltd builds the loop powered pressure transmitter to ISO9001, inspects every unit before packing and sends a photo for confirmation ahead of dispatch. Staff follow up after delivery and collect feedback for product improvement. EXW, FOB and DDP terms are open, with USD and other major currencies accepted. Volume discounts are negotiable by quantity. Some samples can be supplied free; where cost is higher, a sample charge applies, and custom samples usually take 3–30 days.

 

 

Hot Tags: loop powered pressure transmitter, China loop powered pressure transmitter manufacturers, suppliers, factory

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!