Compact Pressure Transducer

Compact Pressure Transducer

Details
The compact pressure transducer is built for the very small installation envelopes inside automated machinery, with overall length usually held within 50 mm.
Category
Industrial Pressure Transmitter
 
Send Inquiry
Description
Technical Parameters

Welded Stainless Body Under 50 mm

 

compact pressure transducer

The compact pressure transducer is built for the very small installation envelopes inside automated machinery, with overall length usually held within 50 mm. Housing and diaphragm are welded into one stainless steel piece, so there are no O-rings to age and no seal path for media to creep through. Its low weight keeps inertia from loading fittings loose when it sits on moving parts or thin pipe runs. Output can be 4-20mA or 0.5-4.5V ratiometric to suit different data acquisition cards.

 

Technical Data Table

 

Parameter

Specification

Dimensions

Miniature design (length usually within 50mm)

Port size

Small threads (e.g. G1/4, M12)

Housing and diaphragm

Fully welded stainless steel

Output signal

4-20mA or 0.5-4.5V ratiometric

Vibration performance

High (no mechanical moving parts)

 

Robot Grippers and Bench Rigs


Pneumatic gripper pressure feedback at the end of robot arms and automated manipulators is a common application. Small hydraulic pump stations and medical gas circuits use it for pressure monitoring. Laboratory test benches with little free space use it for pressure data collection. Small threads such as G1/4 and M12 suit the compact port arrangement.

 

Ratiometric Versus 4-20mA Output


A 0.5-4.5V ratiometric signal scales with the supply voltage, which allows direct connection to microcontrollers or data acquisition devices with analog inputs and removes the need for a separate transmitter. Where the control system takes 4-20mA, the same compact pressure transducer is ordered with the 4-20mA option and wires straight in.

 

Welded Construction and Shock-Proof Packing


The fully welded stainless structure targets very low leakage risk and high pressure resistance; if the internal sensor fails, whole-unit replacement is normally advised. Consultants confirm installation space and thread requirement before order. Each unit is 100% inspected before release and third-party inspection is accepted. Static bags and custom shock-proof boxes protect these small instruments in transit. Standard delivery is 2–30 days; custom output signal or port size usually takes 5–30 days.

 

 

Hot Tags: compact pressure transducer, China compact pressure transducer manufacturers, suppliers, factory

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!