Pressure Transducer With Digital Display

Pressure Transducer With Digital Display

Details
The pressure transducer with digital display combines an analog pressure sensor with a local four-digit LED or LCD head directly on the housing.
Category
Industrial Pressure Transmitter
 
Send Inquiry
Description
Technical Parameters

Integrated Digital Readout Module

 

pressure transducer with digital display

The pressure transducer with digital display combines an analog pressure sensor with a local four-digit LED or LCD head directly on the housing. This eliminates the need for an external pressure gauge during site inspections, allowing maintenance staff to verify the pressure at the pipeline instantly. The module supports on-site zero adjustment and range scaling via push buttons, which avoids opening a control cabinet or connecting a configuration tool during the initial pressurization of a new skid.

 

Technical Data Table

 

Parameter

Specification

Output signal

4-20mA two-wire

Display

4-digit LED or LCD digital display

Wetted material

316L stainless steel

Pressure range

Micro pressure to 100 MPa (customizable)

Accuracy

0.5% FS (0.25% optional)

Protection rating

IP65 / IP67

Supply

12~36V DC (loop-powered optional)

Adjustment

Push-button zero/range setting

 

Local Diagnostics and Data Acquisition


In automated filtration systems, operators rely on the local display for quick pressure drop checks, while the 4-20mA loop simultaneously feeds the PLC. Chilled-water manifolds in HVAC systems utilize the head to verify riser pressure at a glance while sending continuous data to the building management system. For R&D test benches, the local readout assists with manual valve adjustments, and the analog output records the data. The 316L stainless steel diaphragm manages standard process fluids, with an IP65/IP67 housing protecting the electronics during washdowns and outdoor installations.

 

Configuration and Signal Supply


Standard accuracy is 0.5% FS, with an optional 0.25% FS for demanding loops. Measuring spans range from micro pressure up to 100 MPa. The unit operates on a 12-36V DC supply, and a loop-powered variant is available for systems with two-wire cabling. The push-button scaling functions within the factory-configured span, so the working pressure should be stated during ordering to ensure the display resolution matches the application.

 

Calibration and Ordering Process


Each pressure transducer with digital display is tested for synchronization between the digital head and the 4-20mA output before packing. Dispatch photos confirm the unit's condition, and it is secured in a carton or wooden case. Standard lead time is 2-30 days, while custom ranges or thread types require 5-30 days. EXW, FOB, and DDP terms are supported for major currencies.

 

 

Hot Tags: pressure transducer with digital display, China pressure transducer with digital display manufacturers, suppliers, factory

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!