Explosion Containment in a Cast Aluminum Body

The flameproof pressure transmitter houses its circuit in a die-cast aluminum enclosure with multiple sealing faces, so an internal spark or explosion stays inside the body instead of reaching flammable gas outside. It holds a high protection level through outdoor humidity and dust. A 316L stainless steel or Hastelloy diaphragm covers corrosive process media, and the diaphragm structure carries overpressure margin against short pressure spikes before the sensing element sees them.
Technical Data Table
|
Parameter |
Specification |
|
Explosion rating |
Ex d IIC T6 (flameproof) |
|
Measuring diaphragm |
316L stainless steel or Hastelloy |
|
Output signal |
4-20mA (two-wire) |
|
Process connection |
Threaded or flange mounting |
|
Housing material |
Die-cast aluminum with anti-corrosion coating |
Two-Wire Loop for Straight Replacement
The 4-20mA two-wire loop design cuts field cabling work. An existing transmitter can be swapped for this flameproof pressure transmitter without adding cable runs, since power and signal share the same pair. Refinery and chemical plant reactors and transfer piping use it where fluids are corrosive. Oil and gas gathering stations install it in high-pressure hazardous zones. Pharmaceutical equipment handling flammable solvents relies on it for line pressure collection.
Diaphragm Grade and Hot Media Handling
Hastelloy is the usual pick for strongly corrosive fluids such as certain acid and alkaline streams, and the longer service life justifies the upgrade. Standard versions are meant for ambient-temperature media. On hot process lines, a condensate loop or heat sink fitted at the process connection keeps heat away from the internal electronics.
Order Review, Inspection and Shipping
Before quoting, engineers go through medium type and range requirement to settle diaphragm material. Every unit is 100% inspected before packing. Flameproof goods ship in wooden cases or heavy-duty cartons with shock cushioning, and a photo goes out before dispatch. Standard lead time is 2–30 days; urgent orders can be pushed ahead through overtime production. Third-party inspection is available.
Hot Tags: flameproof pressure transmitter, China flameproof pressure transmitter manufacturers, suppliers, factory

