Level Switch With Remote Display 4 20ma

Level Switch With Remote Display 4 20ma

Details
The level switch with remote display 4 20ma separates the sensing probe from the readout head. The probe, submersible or float style, goes down into the sump or tank, while the display unit mounts on a rail or panel at eye level.
Category
Hydraulic Pressure Switch
 
Send Inquiry
Description
Technical Parameters

Split Probe and Display Unit

 

level switch with remote display 4 20ma

The level switch with remote display 4 20ma separates the sensing probe from the readout head. The probe, submersible or float style, goes down into the sump or tank, while the display unit mounts on a rail or panel at eye level. Cable between the two carries the 4-20mA level signal and the display supply. An optional switch output (PNP/NPN) can run alongside the analog signal for pump start-stop or high-level alarm.

 

Technical Data Table

 

Parameter

Specification

Output signal

4-20mA (optional switch output)

Structure

Split type, probe and display head separate

Measuring span

0.5~5m (longer customizable)

Wetted material

304/316L stainless steel or engineering plastic

Supply

12~30V DC

Protection rating

Probe IP68, display head IP65

Display

Local LCD/LED digital display

 

Sump, Reservoir and Wastewater Points


Wastewater collection pits put the probe below the grating and the display at the walkway, so an operator reads level without lifting a cover. Water reservoirs and chemical dosing tanks use the split arrangement where the tank top is crowded or the liquid surface is hard to see. Coolant reservoirs on machine tools use it for level monitoring. Wetted material is 304/316L stainless steel or engineering plastic, selected against the medium.

 

Measuring Span and Protection


Measuring spans typically run from 0.5 m to 5 m, with longer ranges made to order. The probe carries IP68 protection for continuous immersion, while the display head is IP65 for washdown and weather. Supply is 12–30V DC. The 4-20mA output scales across the stated span, and the switch point on the optional relay output is set at order.

 

Cable Length, Inspection and Delivery


Buyers should state the distance from probe to display so the interconnecting cable is cut to match. JIangsu Zhaollong electri CS Co.ltd inspects each level switch with remote display 4 20ma before packing and confirms the readout tracks the probe signal. The probe and head are protected separately for shipping, with cable coiled and fixed. Standard delivery is 2–30 days; custom cable lengths take 5–30 days. Mixed models can be combined in one order.

 

 

Hot Tags: level switch with remote display 4 20ma, China level switch with remote display 4 20ma manufacturers, suppliers, factory

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!