Right Angle Float Switch

Right Angle Float Switch

Details
The right angle float switch uses a bent tube with a 90-degree elbow, shaped for horizontal insertion through an opening in a tank side wall.
Category
Hydraulic Pressure Switch
 
Send Inquiry
Description
Technical Parameters

Ninety-Degree Body for Side-Wall Entry

 

right angle float switch

The right angle float switch uses a bent tube with a 90-degree elbow, shaped for horizontal insertion through an opening in a tank side wall. A reed switch inside responds to the float magnet, and the purely mechanical buoyancy action needs no external power, delivering a dry contact output. There is no complex electronic circuit to service, so daily maintenance is close to nil. Switching height is set by the mounting position, and the contact connects directly to a PLC digital input module or a control relay.

 

Technical Data Table

 

Parameter

Specification

Material

304/316 stainless steel or engineering plastic (by medium)

Operating principle

Internal reed switch triggered by magnet

Mounting

Side-wall horizontal threaded (right-angle body)

Contact type

NO/NC (dry contact, unpowered)

Working temperature

Depends on seal material, typically -10°C~120°C

 

Tank Levels and Pump/Valve Control


Building water supply and drainage tanks use it for high and low level alarms and pump control. Chemical and oil storage tanks use it for overflow prevention and dry-run protection. Sewage tanks and sumps switch pumps or valves when the level reaches a limit. Material is 304/316 stainless steel or engineering plastic by medium, and the contact is normally open or normally closed as a dry contact. Working temperature depends on seal material, typically -10°C~120°C.

 

Headroom Advantage of the Bent Tube


Horizontal side insertion leaves the top electrical connection independent of overhead clearance, which suits tanks with limited headroom or closed tops. The compact float follows the liquid surface and trips the reed switch promptly without sticking. The stainless steel body and sealing suit weakly corrosive liquids such as machine oil.

 

Material Selection and Mixed Purchasing


Buyers should state medium corrosiveness and mounting thread so the right material is chosen. Different materials or contact types can be combined in one order. Each switch is 100% tested before packing to confirm free float movement, and cartons are used for shipment. Standard delivery is 2–30 days; damage found on arrival is handled under contract terms and by agreement between both parties.

 

 

Hot Tags: right angle float switch, China right angle float switch manufacturers, suppliers, factory

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!