Medical Thermocouple

Medical Thermocouple

Details
The medical thermocouple is built around a fine sensing junction that fits into the narrow temperature-measurement points found on medical devices and laboratory instruments.
Category
Thermocouples
 
Send Inquiry
Description
Technical Parameters

Small Sensing Tips for Medical Equipment

 

medical thermocouple

The medical thermocouple is built around a fine sensing junction that fits into the narrow temperature-measurement points found on medical devices and laboratory instruments. Its small thermal mass lets the tip register temperature changes quickly, so control circuits receive a current reading rather than a delayed one. The probe body can be produced in slim diameters, and lead-out or miniature plug termination keeps the assembly light where instrument space is limited.

 

Technical Data Table

 

Parameter

Specification

Graduation

K-type / J-type (optional)

Structure

Fine sensing junction, slim probe body

Termination

Miniature plug or direct lead-out

Application

Medical devices, sterilization chambers, analytical instruments

Customization

Sheath diameter, cable length and termination to drawing or sample

 

Where Temperature Feedback Matters


Patient-warming equipment, sterilization and disinfection chambers, and analytical instruments all rely on stable surface or fluid temperature feedback. The medical thermocouple suits those measurement points, including narrow channels and small contact areas that a standard probe cannot reach. Because the junction sits close to the tip, readings track set-point changes during warm-up, hold and cool-down phases of a device cycle.

 

Materials and Build Options


Probe sheath, insulation and cable materials are selected against the actual working environment - temperature range, cleaning routine and contact medium. K-type and J-type graduations are available, and the sensing junction can be produced in an ungrounded, grounded or exposed configuration depending on the response speed and electrical isolation the instrument requires. Lead wires can be supplied with color-coded insulation for easy identification inside device harnesses.

 

Drawing-Based Production at JIangsu Zhaollong electri CS Co.ltd


JIangsu Zhaollong electri CS Co.ltd produces the medical thermocouple to customer drawings or samples under OEM and ODM arrangements, with the in-house development team reviewing tip geometry, sheath diameter, cable length and termination before production. Manufacturing follows ISO9001, and each unit is 100% inspected before packing, with third-party inspection accepted. Standard lead time is 2–30 days, and custom orders take 5–30 days. Cartons or wooden cases are used according to shipping needs, with a photo sent for confirmation before dispatch. EXW, FOB and DDP terms are supported, with settlement in USD, EUR or GBP. Bulk orders can be quoted with quantity-based discounts.

 

 

Hot Tags: medical thermocouple, China medical thermocouple manufacturers, suppliers, factory, noble metal thermocouples, Remote thermocouple, s thermocouple, T type surface thermocouple, temperature controller with thermocouple, thermocouple measurement

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!