Battery Pack Micro Thermocouple

Battery Pack Micro Thermocouple

Details
The battery pack micro thermocouple uses ultra-fine thermoelectrodes with very low thermal inertia, so a temperature rise inside a pack registers quickly at the start of thermal runaway.
Category
Thermocouples
 
Send Inquiry
Description
Technical Parameters

Fine Thermoelectrodes for Early Thermal Warning

 

battery pack micro thermocouple

The battery pack micro thermocouple uses ultra-fine thermoelectrodes with very low thermal inertia, so a temperature rise inside a pack registers quickly at the start of thermal runaway. The micro patch structure lies against prismatic or cylindrical cell surfaces and busbars to pick up localized heating. Its insulation layer is formulated for vibration resistance and aging resistance, holding signal stability through long road vibration and repeated temperature cycling.

 

Technical Data Table

 

Parameter

Specification

Graduation

K-type / T-type / J-type

Temperature range

-70°C~260°C

Structure

Micro patch type, ultra-fine thermoelectrodes

Insulation material

High-temperature, aging-resistant insulation (vehicle vibration)

Cable

Thin, flexible, suits tight battery pack spaces

 

EV, Storage and Underhood Monitoring Points


Inside new-energy vehicle battery packs, the probe samples cell and module surface temperature to support overheat warnings. Storage-station battery clusters use it for thermal runaway warning and real-time temperature protection. Underhood motors and control units use the same small format for local hot-spot checks where cable routing space is tight. The low-profile body takes up little of the pack's structural volume and fixes with insulating tape or structural adhesive.

 

Options Across Three Graduations


K-type, T-type and J-type versions are available, with a measuring range of -70°C to 260°C. Cable is thin and flexible to follow narrow pack routes, and the insulation layer is rated for high temperature and aging.

 

Custom Samples and Production Updates


JIangsu Zhaollong electri CS Co.ltd controls insulation aging and vibration performance during production for vehicle environments. Each battery pack micro thermocouple is 100% inspected before packing and third-party inspection is accepted. OEM and ODM production follows drawings or samples, with custom sample time usually 3–30 days. Batch orders receive periodic progress updates with photos and video. Cartons or wooden cases are used as the product requires. Samples can be supplied where cost allows.

 

 

Hot Tags: battery pack micro thermocouple, China battery pack micro thermocouple manufacturers, suppliers, factory, noble thermocouple, Surface Thermocouple, thermocouple for high temperature measurement, thermocouple lead, thermocouple measurement, Type N armored thermocouple

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!